TPM Self Test Failure Information

Group Number 810X

Device Trusted Platform Module

This group is used for testing the Trusted Platform Module (TPM) of the system. The TPM is a chip providing functionality to uniquely and securely identify the system.

Test Number 302

Test Name TPM Self Test

This test runs vendor supplied self test on TPM device, a vendor supplied self test is a combined set of basic tests which check if TPM device is working properly and able to produce random and keys.

Estimated Test Time Dependent on the re-power delay and the powered down devices attached to the system.

ERRORCODES & TROUBLESHOOTING

General error executing the test. CODE="0x01/008"

General error executing the test for the TPM. CODE="0x02/091"

Failed to open a device. CODE="0x03/001"

General error executing the test for the TPM. CODE="0x04/090"

Vendor Self test failed on the TPM device. CODE="0x05/001"

Failed to access TPM device. Either driver or TPM device does not support this method. CODE="0x06/001"

WMI class failure, either driver is not installed or device is missing or malfunctioning. CODE="0x07/001"

Presence test failed on the TPM device. no supported specification was found. CODE="0x08/001"

TROUBLESHOOTING0: There has been a general error while executing test. The error code will give more information on the device that has failed during the test. To diagnose this issue the test can be run with the failing component excluded, and specific tests for the failing component can be run from the relevant group.