Views:

Pc-Check Windows Ambient Light Level Test Failure Information

Group Number 760X

 

Device Ambient Light

 

The Ambient Light sensor is a sensor used to detect the amount of light in the environment it operates in. This sensor is most commonly used for portable devices to adjust the screen brightness as required to make the most of the battery life.

 

Test Number 303

Ambient Light Level

This test will check the amount of light detected by the ambient light sensor of a system. The Operator is required to cover and uncover the ambient light sensor, where the test will read a significant amount of change of light within the specified time-out. The ambient light sensor is available in most tablet devices located on the front side or directly attached to the front facing camera. In folding systems the sensor might be located towards the bottom side.

Estimated Test Time Depends on the time-out parameter specified by the operator.

PARAM1: Time-out

Test time-out parameter for operator interaction.

PARAM2: Minimum luminous intensity level

Minimum luminous flux level in order to achieve the required test state.

 

ERRORCODES & TROUBLESHOOTING

 

The sensor was not found. CODE=0x00/3FF

TROUBLESHOOTING0: The sensor was not detected. This could be caused by faulty drivers or a loose connection.

 

The sensor failed to start. CODE=0x01/3FF

TROUBLESHOOTING0: The sensor was not detected. This could be caused by faulty drivers or a loose connection.

 

Access to the sensor was denied. CODE=0x02/3FF

TROUBLESHOOTING0: The sensor was not detected. This could be caused by faulty drivers or a loose connection.

 

The sensor has encountered an error. CODE=0x03/3FF

TROUBLESHOOTING0: The sensor was not detected. This could be caused by faulty drivers or a loose connection.

 

The sensor is in an unknown state. CODE=0x04/097

TROUBLESHOOTING0: The sensor was not detected. This could be caused by faulty drivers or a loose connection.

 

The Operator chose to fail the test. CODE=0x05/3FF

TROUBLESHOOTING2: The interactive test failed since the operator cancelled the test. More information should be requested from the operator.

 

Unable to create test window. CODE=0x06/001

TROUBLESHOOTING1: Creation of the interactive window failed or the test timed out. Most likely an operating system related error.

 

The test timed out. CODE=0x07/3FF

TROUBLESHOOTING1: Creation of the interactive window failed or the test timed out. Most likely an operating system related error.

 

Required files to perform the test are missing from the diagnostic directory. CODE=0x08/3FF

TROUBLESHOOTING3: Required files to perform the test are missing from the diagnostic directory. Please check your deliverable to ensure all files are present.

 

 

Eurosoft (UK) Ltd 
3 St. Stephen's Road 
Bournemouth, Dorset, BH2 6JL 
United Kingdom 
Tel +44 (0)1202 297315 
Fax +44 (0)1202 558280

www.eurosoft-uk.com