Pc-Check® UEFI

Test Result

Audio Streamed PCM Test Failure Information

Test Group 5612

Device Audio

This group tests High Definition Audio controller devices.

Test Number 402

Test Name Streamed PCM

Tests the audio controller streamed PCM output. Audio is output and the operator shall determine if the audio is correctly heard.

Note: Since testing occurs in the pre-boot environment without drivers, SPDIF, HDMI or DP output is unavailable. For these and other technologies, please use our Windows diagnostic.

Note: The test may produce loud output, please be careful with externally connected equipment and avoid using headphones.

Estimated Test Time 10s to 1.5m

ERRORCODES & TROUBLESHOOTING

The test cannot be executed because the device number is invalid. CODE="0x00/3FF"
TROUBLESHOOTING0: An internal program error. The test result is inconclusive. 

The test cannot be executed because device initialisation failed. CODE="0x01/3FF"
TROUBLESHOOTING0: An internal program error. The test result is inconclusive. 

The test cannot be executed due to a memory allocation fault. CODE="0x02/3FF"
TROUBLESHOOTING0: An internal program error. The test result is inconclusive. 

The test cannot be executed due to a file read error. CODE="0x03/3FF"
TROUBLESHOOTING0: An internal program error. The test result is inconclusive. 

The operator has reported that correct audio output was not heard. CODE="0x04/3FF"
TROUBLESHOOTING1: Check any cable connections. No audio will be heard from controllers that output digitally (SPDIF, HDMI or DP), this is normal, for these and other technologies, please use our Windows diagnostic.

The DMA test has failed. CODE="0x05/3FF"
TROUBLESHOOTING2: The audio controller may be faulty - investigate further.

There are no available analogue outputs on the selected controller. CODE="0x06/3FF"
TROUBLESHOOTING1: Check any cable connections. No audio will be heard from controllers that output digitally (SPDIF, HDMI or DP), this is normal, for these and other technologies, please use our Windows diagnostic.


There are no available analogue outputs on the selected controller. CODE="0x07/3FF"
TROUBLESHOOTING1: Check any cable connections. No audio will be heard from controllers that output digitally (SPDIF, HDMI or DP), this is normal, for these and other technologies, please use our Windows diagnostic.