Pc-Check® UEFI

Test Result

Monitor Panel Test Failure Information

Test Group 3502

Device Monitor

This group test the video display panel or monitor.

Displays a series of images to assist in determining the correct operation of the display panel or monitor. Look for issues such as dead pixels and faulty colour channels.

Note: UEFI pre-boot supports only one monitor which is the default monitor at boot.

Test Number 401

Test Name Panel Test

This test is an interactive test which presents various screen test patterns. The operator must assess carefully the display to identify dead pixels or poor colour representation. The operator must press a key to proceed to the next test pattern. If no input is received for approximately one minute, the test will end automatically. At the end of the test, the operator shall be asked if the display seemed correct.

Estimated Test Time Approx 1m

PARAM1: Maximum Horizontal Resolution

Maximum horizontal resolution for display of test patterns. Use this to limit resolution if BIOS offers modes beyond capability of the panel. 

ERRORCODES & TROUBLESHOOTING

The test cannot be executed because something is not supported. CODE="0x00/3FF"

TROUBLESHOOTING1: An internal error prevented proper test operation. The test was inconclusive. It may be a firmware error or limitation. Check for BIOS updates. 

Display panel declared faulty by operator. CODE="0x01/3FF"

TROUBLESHOOTING0: The display panel is faulty. Consider replacement.

Failed so set graphics mode selected from resolutions. CODE="0x02/3FF"

TROUBLESHOOTING1: An internal error prevented proper test operation. The test was inconclusive. It may be a firmware error or limitation. Check for BIOS updates. 

Failed to restore original video mode. CODE="0x03/3FF"

TROUBLESHOOTING1: An internal error prevented proper test operation. The test was inconclusive. It may be a firmware error or limitation. Check for BIOS updates.