Pc-Check Windows Mouse Movement Test Failure Information

Group Number 150X

Device Pointing Devices

This group covers system information gathering and testing of Pointing devices, usually these are Mice or Touchpads.

Test Number 303

Movement

The Movement Test will display a ring for the mouse to to be moved around to test mouse tracking functionality.

Estimated Test Time Dependent on user input.

PARAM1: Time-out

The time-out for waiting for a response from the operator.

PARAM3: Start-up Delay

The start up delay time in seconds before the test commences.

PARAM4: Ring Size

The size of the ring the user will need to guide the cursor inside.

PARAM5: Inner Ring Size

The size of the inner ring the user will need to guide the cursor inside. This is a percentage of the total ring size.

ERRORCODES & TROUBLESHOOTING

Unable to create test window. CODE="0x01/001"

TROUBLESHOOTING0: The test failed to start. This is most likely caused by a hardware or OS fault.

The Operator chose to fail the test. CODE="0x02/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

The test timed out. CODE="0x03/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

Unable to get the mouse. CODE="0x04/001"

TROUBLESHOOTING0: The test failed to start. This is most likely caused by a hardware or OS fault.

The cursor moved outside the test ring. CODE="0x05/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

The cursor moved back into a tested area. CODE="0x06/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.