Pc-Check Windows Mouse Quick Mouse Test Failure Information

Group Number 150X

Device Pointing Devices

This group covers system information gathering and testing of Pointing devices, usually these are Mice or Touchpads.

Test Number 301

Quick Mouse

The Quick Mouse Test will display two boxes box that must be clicked to pass the test. The left green box will require a left click, while the right blue box will require a right click. The test will pass once both buttons have been pressed.

Estimated Test Time Dependent on user input.

PARAM1: Time-out

The time-out for waiting for a response from the operator.

ERRORCODES & TROUBLESHOOTING

Unable to create test window. CODE="0x01/001"

TROUBLESHOOTING0: The test failed to start. This is most likely caused by a hardware or OS fault.

The Operator chose to fail the test. CODE="0x02/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

The test timed out. CODE="0x03/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

Unable to get the mouse. CODE="0x04/001"

TROUBLESHOOTING0: The test failed to start. This is most likely caused by a hardware or OS fault.

The cursor moved outside the test ring. CODE="0x05/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.

The cursor moved back into a tested area. CODE="0x06/3FF"

TROUBLESHOOTING1: The test failed due to a possible fault with the hardware or due to operator error.