Pc-Check Windows Bluetooth Device Pairing Test Failure Information

Group Number 130X

Device Bluetooth

Bluetooth is a wireless technology standard for short wave, short distance data exchange between fixed and mobile devices in specified bands and Personal area networks (PANs). This group identifies Bluetooth controllers and tests the connectivity and identification of client devices.

Test Number 302

Test Name Device Pairing Test

The Bluetooth Device Connection test will initialise an authentication session between the host and client. Authentication mode is determined by the supported mode of the client, It could be legacy using a PIN, Numerical or Pass Key. A successful pairing is considered a successful data connection and will pass the test.

Estimated Test Time Dependent on test parameters.

ERRORCODES & TROUBLESHOOTING

The user clicked the fail button CODE="0x00/3FF"

TROUBLESHOOTING0: The user did not pass the test. The user has knowledge of the reason why the test failed or timed out. 

The test window could not be created CODE="0x01/001"

TROUBLESHOOTING1: The test window failed to be created. 

The user did not respond CODE="0x02/3FF"

TROUBLESHOOTING0: The user did not pass the test. The user has knowledge of the reason why the test failed or timed out. 

General Windows® Exception during tests CODE="0x03/008"

TROUBLESHOOTING2: An error occurred while testing. 

The current time was incorrect CODE="0x04/017"

TROUBLESHOOTING2: An error occurred while testing. 

Required files to perform the test are missing from the diagnostic directory. CODE="0x05/3FF"

TROUBLESHOOTING3: Required files to perform the test are missing from the diagnostic directory.

Failed to register callback, System internal error CODE="0x06/3FF"

TROUBLESHOOTING2: An error occurred while testing. 

Failed to authenticate CODE="0x07/3FF"

TROUBLESHOOTING2: An error occurred while testing.