Pc-Check Windows Gyroscope Simple Roll Test Failure Information

Group Number 110X

Device Gyroscope

A gyroscope is a device that measures angular rotational velocity and is often used to detect if the system is rotated, tilted or turned over.

Some smart-phones and tablets contain gyroscopes for user interface control. Often the gyroscope is used in conjunction with an accelerometer to present landscape or portrait views of the device's screen, based on the way the device is being held.

Test Number 303

Simple Roll Test

The test will check the orientation of the device, the test will pass once the device has achieved rotation in all 6 main directions. The operator is requested to:"

1. Rotate the tablet such that the screen faces the operator. This might be portrait or landscape depending on system."

2. Turn 90 degrees from step 1.

3. Turn 90 degrees from step 2.

4. Turn 90 degrees from step 3.

5. Rotate the tablet such that the screen faces up.

6. Rotate the tablet such that the screen faces down.

Estimated Test Time 30 Seconds.

PARAM_ID1:Time-out

Test time-out.

ERRORCODES & TROUBLESHOOTING

The sensor was not found. CODE=0x00/3FF

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

The sensor failed to start. CODE=0x01/3FF

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

Access to the sensor was denied. CODE=0x02/3FF

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

The sensor has encountered an error. CODE=0x03/3FF

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

The sensor is in an unknown state. CODE=0x04/097

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

Unable to create test window. CODE=0x05/001

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

The test timed out. CODE=0x06/3FF

TROUBLESHOOTING0:The sensor was not detected. This could be caused by faulty drivers or a loose connection.

The Operator chose to fail the test. CODE=0x07/3FF

TROUBLESHOOTING2:The interactive test failed since the operator cancelled the test. Please consult the operator for more information.

Required files to perform the test are missing from the diagnostic directory. CODE=0x08/3FF

TROUBLESHOOTING3:Required files to perform the test are missing from the diagnostic directory.

Unable to set rotation of the system. CODE=0x09/3FF

TROUBLESHOOTING4:The interactive test requires rotation to be disabled. Check your system settings.

Noise level above the threshold for this sensor. CODE=0x0A/3FF

TROUBLESHOOTING1:Creation of the interactive window failed or the test timed out. Most likely an operating system error.